New Zealand’s Delta Strike Company came to Flying for on-site inspection and cooperation

If you want to buy bowling equipment, please contact Guangzhou Flying. We will definitely provide you with the best service.

Building a bowling alley may seem very expensive to many people. But you don’t need to spend too much money on Flying bowling. Our prices are very affordable. You can get high-quality bowling equipment at an extremely competitive price from us.

A bowling ball return system uses a combination of gravity, belts, and sometimes lifts to bring your ball back to you after your roll. Here's a breakdown of the typical process:

1. Ball Exit: After rolling down the lane, the ball exits into a channel at the end. This channel might have a slight incline to help guide the ball towards the return mechanism.

2. Transfer Tray: The ball rolls into a shallow tray or trough. This tray might have a diverter at the end to ensure balls from adjacent lanes don't collide.

3. Elevator or Incline (optional): In some setups, the ball might be lifted to a higher level before entering the return system. This creates a steeper decline for the ball to travel down, helping it gain momentum.

4. Belt Conveyor: The ball reaches a conveyor belt with a textured surface to prevent slipping. This belt carries the ball up an incline.

5. Gravity Channel: Once at the top of the incline, the ball is released onto a long, U-shaped channel. Gravity takes over, pulling the ball down through the channel.

6. Ball Deflector: At the end of the channel, there might be a deflector that diverts the ball slightly towards your lane. This ensures the ball ends up in the correct return slot.

7. Ball Return Tray: The ball finally reaches a tray or cradle positioned in front of your lane, ready for your next roll.

Here are some additional points to note:

• Modern systems might have sensors to detect the presence of a ball and activate the return mechanism accordingly.
• Some higher-end systems use quieter materials and designs to minimize noise during ball return.

The cost of building a bowling alley can vary greatly depending on a number of factors, including:

• Number of lanes: This is obviously a big one. A single lane will cost much less than a whole alley with multiple lanes.
• Location: Building costs are higher in some areas than others. Building in a more populated area will likely be more expensive than a rural area.
• New construction vs. renovation: If you are adding a bowling alley to an existing building, you'll likely save money compared to building a whole new facility.
• Features: Do you want a high-end bowling alley with all the latest technology and amenities? Or are you looking for a more basic setup? The more features you want, the more expensive it will be.

Here's a rough ballpark of what you might expect to pay:

• Home bowling alley: A single lane for your house could cost anywhere from $75,000 to $175,000.
• Small commercial alley: A few lanes in a commercial setting could run from $150,000 to $600,000.
• Large commercial alley: A full-sized bowling alley with many lanes could cost millions of dollars.

If you're serious about opening a bowling alley, it's important to consult with a professional contractor or bowling alley equipment supplier to get a more accurate estimate for your specific project. They can take into account all of the factors mentioned above and give you a more realistic idea of the costs involved.