Flying Bowling: A trend-setting feast of bowling equipment / 2024 IAAPA EXPO EUROPE

Fairway boards and equipment require regular maintenance. Fairway boards need to be oiled every half month and cleaned daily to extend their service life. At the same time, the condition of the rope and ball return machine needs to be checked every period of time to ensure the normal operation of the equipment. Specifically, we will give you detailed maintenance manuals and videos to teach you how to maintain.

The length of the Mini Bowling Lane is about 13 meters. The fairway board area is about 7.6 meters. And the approach area is about 2.44 meters. The equipment maintenance area behind the lane requires a minimum of 1 meter.

Building a bowling alley may seem very expensive to many people. But you don’t need to spend too much money on Flying bowling. Our prices are very affordable. You can get high-quality bowling equipment at an extremely competitive price from us.

A bowling ball return system uses a combination of gravity, belts, and sometimes lifts to bring your ball back to you after your roll. Here's a breakdown of the typical process:

1. Ball Exit: After rolling down the lane, the ball exits into a channel at the end. This channel might have a slight incline to help guide the ball towards the return mechanism.

2. Transfer Tray: The ball rolls into a shallow tray or trough. This tray might have a diverter at the end to ensure balls from adjacent lanes don't collide.

3. Elevator or Incline (optional): In some setups, the ball might be lifted to a higher level before entering the return system. This creates a steeper decline for the ball to travel down, helping it gain momentum.

4. Belt Conveyor: The ball reaches a conveyor belt with a textured surface to prevent slipping. This belt carries the ball up an incline.

5. Gravity Channel: Once at the top of the incline, the ball is released onto a long, U-shaped channel. Gravity takes over, pulling the ball down through the channel.

6. Ball Deflector: At the end of the channel, there might be a deflector that diverts the ball slightly towards your lane. This ensures the ball ends up in the correct return slot.

7. Ball Return Tray: The ball finally reaches a tray or cradle positioned in front of your lane, ready for your next roll.

Here are some additional points to note:

• Modern systems might have sensors to detect the presence of a ball and activate the return mechanism accordingly.
• Some higher-end systems use quieter materials and designs to minimize noise during ball return.